Upgrades & Enhancements
Interested in the latest firmware and features for your QuadTech instrument?
QuadTech offers upgrades and enhancements for our hipot testers, megohmmeters, IR testers and other electrical test equipment. Read below to find out more!
Sentry 10, 20, 30 Hipot Testers
|
$270.00 - Includes Calibration
|
|
-
Current version is at 2000 712
-
Allows storage of 80 single step tests
-
Or allows storage of 40 two-step tests
-
Upgrade requires software modification
|
Upgrade Now!
For Sentry 10, 20 and 30 Hipot Testers, please contact our Customer Care Center at 800-253-1230 for further information.
Sentry 10 Plus to Sentry 20 Plus Hipot Testers
|
$520.00 - Includes Calibration
|
|
-
Current version is at 2000 712
-
Allows storage of 80 single step tests
-
Or allows storage of 40 two-step tests
-
Upgrade requires both software and hardware modification
|
Upgrade Now!
For Sentry 10 Hipot Testers, please contact our Customer Care Center at 800-253-1230 for further information.
Sentry 10 Plus to Sentry 30 Plus Hipot Testers
|
$820.00 - Includes Calibration
|
|
|
-
Current version is at 2000 712
-
Allows storage of 80 single step tests
-
Or allows storage of 40 two-step tests
-
Upgrade requires both software and hardware modification
|
Upgrade Now!
For Sentry 10 Hipot Testers, please contact our Customer Care Center at
800-253-1230 for further information.
Sentry 20 Plus to Sentry 30 Plus Hipot Testers
|
$420.00 - Includes Calibration
|
|
|
-
Current version is at 2000 712
-
Allows storage of 80 single step tests
-
Or allows storage of 40 two-step tests
-
Upgrade requires both software and hardware modification
|
Upgrade Now!
For Sentry 20 Hipot Testers, please contact our Customer Care Center at
800-253-1230 for further information.
Guardian 1010, 1030 and 1030S Hipot Testers
|
N/A
|
|
-
Current version is at 2.47
|
Please contact our Customer Care Center at
800-253-1230 for further information.
Guardian 6000 and 6100 Safety Analyzers*
|
$350.00 - Includes Calibration
|
|
Version 1.08
-
Released January 2004
-
Adds remote command "MEAS:STEPnn?"
|
|
|
Version 1.00
-
Released Fall 2002
-
Programmable discharge voltage
-
Pause Mode allows a test sequence to be stopped while leads are changed
-
Alphanumeric name can be stored with a particular memory location
-
Setup Storage: 99 memory groups of up to 99 steps each
|
Upgrade Now!
1865 Megohmmeter
|
$975.00 - Includes Calibration
|
|
-
Current version is at 3.0
-
Quicker responding user interface
-
Faster display and updating of measurement results
-
Reduction in overhead time during measurement cycle
|
Upgrade Now!
*Some customers have experienced communication problems installing this version into automated systems designed for older firmware versions. Please call our Applications Support Team before upgrade is scheduled.
|
